>> Features
- Ultra-thin diaphragm for smooth high end and tight, controlled low end
- 15dB pad for performance consistency across a wider range of high SPL sources
- Low self-noise and transformerless preamplifier circuitry

>> Specifications
- Cartridge Type : Permanently Biased Condenser
- Frequency Response : 20 to 20,000 Hz
- Directional Polar Pattern : Cardioid
- Output Impedance : 150 ohms (actual)
- Attenuation Switch
   0 dB or 15 dB attenuation
   Phantom Power
   48 Vdc +/- 4 Vdc
   (IEC-268-15/DIN 45 596), positive pins 2 and 3

- Current Drain : 5.2 mA typical at 48 Vdc
- Common Mode Rejection : >50 dB, 20 Hz to 20 kHz
- Polarity : Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
- Dimensions and Weight
   24 mm (0.950 in.) diameter
   162 mm (6.375 in.) long
   195 grams (6.9 oz.)

- Sensitivity (typical, at 1000 Hz; 1 Pa = 94 dB SPL) :-41 dBV/Pa
- Self-noise (typical, equivalent SPL; A-weighted (IEC 651)) :19 dB

- Maximum SPL@ 1000 Hz
   5000 ohms load (Attenuator on): 150 (165 dB)
   2500 ohms load (Attenuator on): 144 (159) dB
   1000 ohms load (Attenuator on): 139 (154 dB)

- Output Clipping Level*
   5000 ohms load: 15 dBV
   2500 ohms load: 9 dBV>
   1000 ohms load: 3 dBV
*20 Hz to 20 kHz; THD < 1%. THD of the microphone preamplifier when applied input signal is equivalent to the cartridge output at specified SPL.

- Dynamic Range (Attenuator On)
   5000 ohms load: 133 (136) dB
   2500 ohms load: 128 (130 dB)
   1000 ohms load: 122 (125) dB

- Signal to Noise Ratio** : 75 dB
**S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.  Name Availability